KTY Series
Product: KTY Series
Category: Torque Motor

Description:

Our new KTY series of housed synchronous torque motors not only sets a new benchmark with regard to maximum drive system torque and stiffness, but they are also extremely compact. The KTY series is a useful alternative to geared motors in any application. The torques are sensibly graduated from 6.5 to 270 Nm, which means that Direct-Drive Technology is finally available in this entire torque class!

• High overloading capacity and extremely dynamic

• High positioning accuracy because of the use of high-resolution encoder systems and the
elimination of components that are susceptible to play and friction

• Available with full shaft with/without keyway or with a hollow shaft on either the A and/or B side.
Blind hole shafts, shafts with shrink disks or loose flanges are also possible.

• Oscillation strength R is standard, but Class S (per DIN VDE 0530-14) is also possible

• Flange dimensions are standardized to DIN 42 677, but special flanges are also available.

• Flange accuracy in accordance with DIN 42 955

• If desired, we can also increase the permissible radial and axial shaft loads

• Fail-Safe brakes are also an option

KTY-Q Series of Torque Motors

The KTY-Q torque-motor series comes with three different flange sizes, and each flange size is available with 3-4 stack lengths. This broad range of motors neatly and efficiently covers your need for direct-drive torques from 14 to 270 Nm. The square design without a housing provides you with a very cost-effective direct-drive solution where IP54 is sufficient protection.

Download: Torque Motors KTY-Q (ID: 221145 V25.05.10)

KTY-R Series of Torque Motors

For applications that demand IP65 protection, the KTY-R torque-motor series is the right choice. This series of direct-drive torque motors perfectly complements the KTY-Q series, because the KTY-R series is protected by a high-quality aluminum housing, which increases the protection class to IP65. This is the series to use to solve your applications which require a precise, direct-drive motor in difficult environmental conditions. Like the KTY-Q series, the KTY-R series motors are available in three diameters – each with 3-4 stack lengths to give meaningful coverage for torques ranging from 12 to 240 Nm.

Download: Torque Motors KTY-R (ID: 221141 V27.05.10)

KTY-F Series of Torque Motors

KTY-F Torque motors are intended for applications that require a direct-drive solution in the smallest of spaces. With a extremely flat design, the KTY-F torque motors are especially suitable for space-saving solutions. The KTY-F series is likewise available in 3 different sizes – each with 3 stack lengths. The series effectively covers the torque range from 6.5 to 50 Nm.

Download: Torque Motors KTY-F (ID: 221153E V27.05.10)

Back

Industrial & Commercial Sales Enquiries

Accord Network Services Ptd Ltd
9 Yishun Industrial St 1 #03-70 North Spring Bizhub, Singapore 768163

Tel No: (65) 6369 9301 - Fax No: (65) 6369 9302